1560 Clay stone separator _ Clay stone separator

In response to the green mine, the rational use of resources, at present a lot of sand and gravel waste piled up mountains, most of them are the upper layer of the mine, cleaning and dredging the river raw materials, etc., which contains a lot of stone, can not be selected with ordinary equipment, waste of human and financial resources, waste of pity, but also long-term occupation of land. Mainly for the mud-rich raw material earth-stone separation, sand and stone separation, separation and screening, feed transport and other functions.

How it works: Through the motor to drive the multi-stage device of the coupling shaft, the regular turnover movement, by the roller plate is configured to beat the material forward, the screen surface is composed of many linear arrangement of rotating disks, on the roller has an equal arrangement of the screen disc, the roller through the gear drive wheel chain drive and rotation, the rotation direction is consistent with the direction of raw material flow, there is a gap between the shaft and the shaft, To determine the size of the separated material, the irregular wear-resistant device embedded in the shaft holds up the large particle size material to move forward, because the screen shaft is designed according to different running directions, so when the material runs faster in the higher running direction; The speed of the material is slower when it runs in a lower direction. The two materials running at different speeds begin to do axial operation when they converge at a certain place on the screen surface to improve the work efficiency of screening, and the small particle materials fall into the bottom of the separator and are sent out by the belt conveyor. It overcomes the problem of screen sticking when various vibrating screens screen wetter materials, and improves the yield and reliability of the separation system.

Structure description: 1560 type mud separator is mainly composed of box, box liner, disc, drive shaft, speed motor, motor pedestal, chain sprocket, bracket and so on. 1, screen box: by different thickness of the national standard Q235 steel plate welded, with a certain strength and stiffness, is the main component of the screen machine. 2, lining plate: wear-resistant manganese plate, with reinforced bolt connection, easy to replace. 3. Disc: thickened high manganese material, strong and wear-resistant. 4, speed control motor: use and maintenance methods see the vibration motor manual. 5, motor pedestal: Install the motor, the connection screw must be tightened before use, especially three days before the trial of the new screen machine, must be tightened repeatedly to avoid loosening. 6, transmission: wear-resistant double sprocket chain transmission, high transmission efficiency, stable operation, durable. 7, bracket: composed of national standard square steel and channel steel, supporting the screen box, the installation of the pillar must be vertical and the ground, the channel steel under the two pillars should be parallel to each other.

Application of mud separator: Clay and mud separation, soil and stone separation, sand and stone separation, large and small stone separation, coal and gangue separation, stale waste separation, landfill waste separation, construction waste separation and other material screening operations, It is widely used in various coarse and fine material separation and screening conditions such as river cleaning, mountain skin stone separation, sand and stone aggregate screening, sand and stone field pretreatment, rubble field, tailings treatment field, garbage disposal field, tunnel slag treatment.

Installation, commissioning and use: The equipment should be fixed on a special foundation and fixed by embedded bolts. If no special foundation is laid, an anti-vibration rubber plate should be laid between the workbench and the base of the equipment, and a safe and reliable grounding protection cable must be configured for the equipment before use. Note: After the equipment is installed in place, the device used to fix the screen body and frame must be removed before starting. After the new screening machine is installed, it should be checked according to the following requirements: 1, close the power switch, confirm the synchronous reverse rotation of the motor, 10-20 minutes of empty operation, if there is abnormal sound when the equipment is running, it should be quickly shut down for inspection and processing. After the equipment is in normal operation, a small amount of material to be screened can be set into the screening machine through the feed port, confirm that the material is moving in the direction of the discharge port, and then gradually increase to the required and can withstand the feed amount. 2. When screening materials, the materials should be evenly put into the feed port to ensure the uniform distribution of materials on the screen surface. When the material falls, there should not be too much impact to avoid damage, and in special cases (such as the material particle size difference is very large, the material ratio is significant, etc.) the chain plate feeder should be added to the feed port. 3, the user can increase or decrease the speed of the screening machine according to the gap of the screening machine and the specific gravity of the material, so that the screening machine can achieve a good screening effect. 4, before the equipment is switched on and off, there should be no retained materials on the screen surface, which should be checked frequently.

1560 mud separator performance characteristics: 1, high screening accuracy, high efficiency, processing capacity is the same volume of traditional equipment 4 times, screening efficiency 1.5 times, single production capacity can be up to about 2000t/h. 2, the use of variable frequency drive control mode, small power, low energy consumption, high safety and stability, adjustable capacity small volume, does not take up space, easy to move. 3, the material is automatically discharged, can be continuous operation, in different mines can play conveying, separation, screening and other functions, to achieve a multi-purpose machine. 4, wear-resistant sprocket, chain linkage, tension chain design, high operating stability, low noise, less wearing parts, easy to replace. 5, modular assembly, can be lengthened or shortened according to material conditions, convenient maintenance and structural adjustment.

Technical parameter

Note: According to the user's different materials to customize the model, separation granularity and other requirements.