Mobile multi-stage linkage roller screening with integrated overall design, the use of chain plate feeder, easy to move, overall compaction, low noise, no stuck machine, no blocking material. The machine does not need to establish the foundation, and can be put into production when it reaches the site. The spray device can also be installed on the multistage linkage roller screen, and there is no dust on the production site. The medium and thick mechanical mobile multi-stage linkage roller screen can effectively screen and feed different blocks of materials and soil. Widely used in river cleaning, mine pre-screening, more screening less broken to improve the output of stone line, improve resource utilization, thick mobile multi-stage linkage roller screen by the majority of users love.
The machine mainly includes: chain plate feeder, roller screen, belt conveyor, mobile frame, electric control system and so on.
After the multi-stage linkage roller screen arrives at the site, tighten all bolts, add enough lubricating oil, and start to operate according to the following requirements. 1, close the power switch, confirm the motor rotation direction, 10-20 minutes of empty operation, equipment in operation if there is abnormal sound, should be quickly shut down for inspection processing. After the equipment is in normal operation, a small amount of material to be screened can be entered into the screen machine through the plate feeder, confirm that the material is moving in the direction of the discharge port, and then gradually increase to the required and can withstand the feed amount. 2. When screening materials, the materials should be evenly put into the feed port to ensure the uniform distribution of materials on the screen surface. When the material falls, there should be no large set impact to avoid smashing the roller screen. 3, the user can increase or decrease the speed of the machine according to the gap of the multi-stage linkage roller screen and the specific gravity of the material, so that the mud and stone separator can achieve good screening size and screening component. 4, before the equipment is started and stopped, there should be no retention of materials on the screen surface. After the material is separated and clean, stop the chain plate feeder - multi-stage linkage roller screen - belt conveyor, stop the machine in this order, and check and maintain the machine after stopping.
Mobile multi-stage linkage roller screen technical parameters:
Model number | Host type | Main engine power | Feeding model number | Feeder power | yield |
ZH1000 | 1000*10 axes | 18.5kw1 | ZB600*3500 | 5.5 kw | 100-200t/h |
ZH1200 | 1200*12 axes | 11kw2 | ZB800*3500 | 7.5 kw | 200-300t/h |
ZH1550 | 1500*15 axes | 15KW3 units | ZB1000*3500 | 15kw | 400-500t/h |
ZH1560 | 1500*20 axes | 15KW4 units | ZB1000*3500 | 15kw | 400-600t/h |
Note: Support user tailored.