Customer service hotline:
Mobile phone version
Two-dimensional code
Slot valve (also known as slide valve or gate, etc.) material can be stainless steel or carbon steel, installed in a variety of powder material hopper outlet or pipe to open and close the role, can also be adjusted by the size of the opening to control the flow of its material.
JFM1Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM1Series (hand, electric, pneumatic) slide valve is sealed with food grade rubber, with no water leakage, good sealing dust without external leakage and internal leakage characteristics. The objects used are mainly bulk powder with low hardness or granular materials with smooth appearance, such as plastic particles,PVC powder, milk powder and so on. This kind of valve is generally made of stainless steel (polishing treatment when needed), and has a blowback device to make the material in the valve without residue to avoid pollution, mainly used in the food and chemical industry, and is required to be clean to prevent pollution and do not allow leakage.
JFM1The structure of the series (hand, electric, pneumatic) slide valve fully considers the characteristics of the powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM1Series gate valve door has hand wheel, zipper wheel, motor drive and cylinder drive four control methods.
The connection flanges of JFM6 series gates we provide you are generally round. Non-standard size valves can also be designed and manufactured according to user requirements.
JFM2Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM2Series (hand, electric, pneumatic) slide valve adopts completely closed structure, so it has the characteristics of good sealing and no external and internal leakage of dust. The objects used are mainly bulk powder with low hardness base density or granular materials with smooth appearance, such as soap grains, grain, flour and germ.
JFM2Series of valves for lightweight structure, can be made of stainless steel (polishing treatment when needed), while with a blowback device to make the valve material without residue to avoid pollution, mainly used in food feed and light industry.
JFM2The structure of the series (hand, electric, pneumatic) slide valve fully considers the characteristics of the powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM2Series gate valve door has hand wheel, zipper wheel, motor drive and cylinder drive four control methods.
The connecting flanges of the JFM6 series gates we offer you are round. Non-standard size valves can also be carried out according to user requirements.
We provide you with JFM series (hand, electric, pneumatic) gate door has the characteristics of good sealing dust without external leakage, easy to wear parts made of wear-resistant materials. At the same time, the structure of the valve fully considers the characteristics of the hard material of the powder particle, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM5The objects used for this series of gate doors are mainly bulk powder or granular materials with high hardness and grindability, such as ash, pulverized coal, cement and limestone powder. This kind of valve is generally made of wear-resistant materials and is mainly used in power metallurgy, mining and building materials industries.
JFM5The series gate has four control methods of hand wheel, zipper wheel, motor drive and cylinder drive.
JFM5The connecting flanges of the series gate are square or rectangular. We can also design and manufacture non-standard flanged valves according to the requirements of users.
JFM6Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM6Series (hand, electric, pneumatic) slot valve has the characteristics of good sealing dust without external leakage, easy to wear parts made of wear-resistant materials. At the same time, the structure of the valve fully considers the characteristics of the high-hardness powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM6The main objects used in this series are bulk powdery or granular materials with high hardness and high wear, such as various power plant ash, cement, silica powder and stone powder. This kind of valve is generally made of wear-resistant materials, which are mainly used in metallurgy, electric power and building materials industries.
JFM6There are four control methods of hand wheel, zipper wheel, motor drive and cylinder drive.
JFM6The connection flanges of series spindles are round. It can also design and manufacture non-standard size flanges according to the requirements of users.
JFM1Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM1Series (hand, electric, pneumatic) slide valve is sealed with food grade rubber, with no water leakage, good sealing dust without external leakage and internal leakage characteristics. The objects used are mainly bulk powder with low hardness or granular materials with smooth appearance, such as plastic particles,PVC powder, milk powder and so on. This kind of valve is generally made of stainless steel (polishing treatment when needed), and has a blowback device to make the material in the valve without residue to avoid pollution, mainly used in the food and chemical industry, and is required to be clean to prevent pollution and do not allow leakage.
JFM1The structure of the series (hand, electric, pneumatic) slide valve fully considers the characteristics of the powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM1Series gate valve door has hand wheel, zipper wheel, motor drive and cylinder drive four control methods.
The connection flanges of JFM6 series gates we provide you are generally round. Non-standard size valves can also be designed and manufactured according to user requirements.
JFM2Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM2Series (hand, electric, pneumatic) slide valve adopts completely closed structure, so it has the characteristics of good sealing and no external and internal leakage of dust. The objects used are mainly bulk powder with low hardness base density or granular materials with smooth appearance, such as soap grains, grain, flour and germ.
JFM2Series of valves for lightweight structure, can be made of stainless steel (polishing treatment when needed), while with a blowback device to make the valve material without residue to avoid pollution, mainly used in food feed and light industry.
JFM2The structure of the series (hand, electric, pneumatic) slide valve fully considers the characteristics of the powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM2Series gate valve door has hand wheel, zipper wheel, motor drive and cylinder drive four control methods.
The connecting flanges of the JFM6 series gates we offer you are round. Non-standard size valves can also be carried out according to user requirements.
We provide you with JFM series (hand, electric, pneumatic) gate door has the characteristics of good sealing dust without external leakage, easy to wear parts made of wear-resistant materials. At the same time, the structure of the valve fully considers the characteristics of the hard material of the powder particle, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM5The objects used for this series of gate doors are mainly bulk powder or granular materials with high hardness and grindability, such as ash, pulverized coal, cement and limestone powder. This kind of valve is generally made of wear-resistant materials and is mainly used in power metallurgy, mining and building materials industries.
JFM5The series gate has four control methods of hand wheel, zipper wheel, motor drive and cylinder drive.
JFM5The connecting flanges of the series gate are square or rectangular. We can also design and manufacture non-standard flanged valves according to the requirements of users.
JFM6Series (manual, electric, pneumatic) cartridge valves are used under normal pressure conditions.
JFM6Series (hand, electric, pneumatic) slot valve has the characteristics of good sealing dust without external leakage, easy to wear parts made of wear-resistant materials. At the same time, the structure of the valve fully considers the characteristics of the high-hardness powder particle material, so that the valve is rarely stuck by the material and the valve plate cannot slide.
JFM6The main objects used in this series are bulk powdery or granular materials with high hardness and high wear, such as various power plant ash, cement, silica powder and stone powder. This kind of valve is generally made of wear-resistant materials, which are mainly used in metallurgy, electric power and building materials industries.
JFM6There are four control methods of hand wheel, zipper wheel, motor drive and cylinder drive.
JFM6The connection flanges of series spindles are round. It can also design and manufacture non-standard size flanges according to the requirements of users.
