Quartz sand making machine (vertical shaft impact crusher) is a new vertical shaft impact crusher improved on the basis of vertical shaft hammer crusher and PFL vertical shaft impact crusher. The hammer head application life of this machine is much better than that of PCL vertical shaft hammer crusher. At the same time, the hammer head utilization rate reaches more than 75%, and the hammer head adjustment and update time takes 20-30 minutes. The life of the wearing part only needs 3 yuan/ton when breaking the harder river pebble, which is the product of the hammer crusher.
Performance characteristics of quartz sand making machine
1 Hammer head, liner and other wearing parts are made of high chromium alloy, which ensures the wear resistance while making it more convenient for customers to remove iron.
2 10-110 mesh yield can reach more than 80% at a time, fineness adjustment can be carried out by adjusting the speed and hammer clearance at the same time, to ensure that the yield is not reduced after the hammer wear
3 Hammer adjusting mechanism is convenient and flexible, the update time is only 30-30 minutes.
4 Hammer hammer handle separation, hammer utilization up to 75 or more.
Working principle of quartz sand making machine
When working, the belt conveyor evenly feeds the raw materials from the top of the machine, and is hit by the high-speed rotating rotor hammer after entering the machine. At the same time, the collision counterattack is carried out between the materials and the materials, and the fineness control is adjusted by the speed and the gap between the hammer head and the counter plate. The number of hammer heads of this machine is adjusted according to the fineness requirements, equipped with variable frequency speed regulating motor.
Technical parameters of quartz sand making machine
Model number | Cylinder diameter (mm) | Feed size (mm) | Discharge size (mm) | Power (kw) | Yield (t/h) | Overall dimensions (L x W x H) mm |
PFL1000 | Ø 1000 | < 50 | < 3/60-95% | 55 | 15 | 2600 * 1400 * 1900 |
PFL1250 | Ø 1250 | < 80 | < 3/60-95% | 75 | 25 | 2800 * 1600 * 2100 |
PFL1500 | Ø 1500 | < 100 | < 3/60-95% | 110 | 45 | 3100 * 1900 * 2200 |
PFL1750 | Ø 1750 | < 120 | < 3/60-95% | 160 | 60 | 3710 * 2360 * 2390 |
PFL2000 | Ø 2000 | < 150 | < 3/60-95% | 200 | 80 | 4100 * 2660 * 2620 |
PFL2300 | Ø 2300 | < 200 | < 3/60-95% | 280 | 100 | 4800 * 2850 * 2720 |
Note: Our products are constantly being upgraded and technical parameters are subject to change without prior notice.