Vertical shaft sand making machine (also known as vertical shaft composite crusher, vertical shaft plate hammer crusher) is the absorption crusher equipment technology of thick Machinery Group Company, combined with the concrete working conditions of cement industry, concentrator, building materials industry, etc., carefully developed a new generation of applicable high hardness material crusher, its power saving, consumption reduction, easy to operate, Smooth work, easy to start, compact equipment, crushing ratio, better than similar products comprehensive effect. The machine is designed five in one. That is, the influence of high line speed, wear-resistant material, body structure, grate design, and rigid hard extrusion crushing can effectively control the long-term stability of discharge particle size. It is widely used in crushing and fine crushing of various hardness materials.
Working principle of vertical shaft sand making machine
When working, the belt conveyor evenly feeds the raw materials from the top of the machine, and is hit by the high-speed rotating rotor hammer after entering the machine. At the same time, the collision counterattack is carried out between the materials and the materials, and the fineness control is adjusted by the speed and the gap between the hammer head and the counter plate. The number and speed of the hammer are adjusted according to the requirements of fineness.
Internal structure of vertical shaft sand making machine
Vertical shaft sand making machine performance characteristics:
1, high crushing efficiency, uniform product particle size, with fine crushing, coarse grinding function.
2, open the observation door can replace the wearing parts, do not need large crane tools.
3, less infrastructure investment, less personnel, less auxiliary equipment.
4. The large plate hammer is made of special wear-resistant material, which can withstand the impact and extrusion of harsh conditions.
5, the working noise is less than 75 db (db level), less dust pollution.
Note on the use of vertical shaft sand machine:
1. The installation foundation should be firm to ensure the parallelism of the machine.
2, check the tightness of each bolt before starting, and check again to see whether the door bolt is tight.
3, read the product instructions in detail, and fill lubricating oil regularly to ensure the normal operation of the machine.
4. Stop feeding before stopping, and turn off the power after the material inside the machine is finished.
Technical parameters of vertical shaft sand making machine
Type specification | Barrel diameter (mm) |
Feed size (mm) |
Discharge size (mm) |
Yield (t/h) | Motor power (kw) |
Dimensions Length × width × height (mm) L×W×H |
PFL1000 | Ø 1000 | < 50 | < 3/60-95% | 15 | 55 | 2600 * 1400 * 1900 |
PFL1250 | Ø 1250 | < 80 | < 3/60-95% | 25 | 75 | 2800 * 1600 * 2100 |
PFL1500 | Ø 1500 | < 100 | < 3/60-95% | 45 | 110 | 3100 * 1900 * 2200 |
PFL1750 | Ø 1750 | < 120 | < 3/60-95% | 60 | 160 | 3710 * 2360 * 2390 |
PFL2000 | Ø 2000 | < 150 | < 3/60-95% | 80 | 200 | 4100 * 2660 * 2620 |
PFL2300 | Ø 2300 | < 200 | < 3/60-95% | 100 | 280 | 4800 * 2850 * 2720 |
Note: Our products are constantly being upgraded and technical parameters are subject to change without prior notice.