Raymond mill introduction GimyangRaymond millRaymond mill after years of practice and continuous improvement, its structure has been increasingly perfect, with high efficiency, low energy consumption, small footprint, less capital investment and environmental pollution and other advantages. Therefore, it is widely used in metallurgy, building materials, chemical industry, mining and other fields of mineral products and materials milling processing, suitable for processing Mohs hardness below 7, humidity below 6% of all kinds of non-flammable and explosive minerals, Such as gypsum, talc, calcite, limestone, marble, potassium feldspar, barite, dolomite, granite, kaolin, bentonite, medical stone, bauxite, iron oxide red, iron ore, etc., the fineness of the finished product is between 613 microns and 440 microns (0.613 mm -0.44 mm), through the joint action of the analytical machine and the fan, It can meet the requirements of different users. Raymond millWorking principle: When working, the material that needs to be crushed is added to the machine from the feed hopper on the side of the cover shell. It revolves around the vertical axis and rotates itself at the same time. Due to the role of centrifugal force during rotation, the grinding roller of Raymond mill swings outward and presses tightly on the grinding ring, so that the blade scoops up the material between the grinding roll and the grinding ring. The purpose of crushing the material is achieved by rolling the roller. Raymond mill advantage 1, Raymond mill three-dimensional structure, small footprint, complete sets of strong, from the block to the finished powder independent into a production system. 2, the fineness of the finished powder is uniform, and the sifting rate is 99%, which is difficult to have other grinding equipment. 3, the main transmission device of the mill adopts closed gear box and belt wheel, smooth transmission and reliable operation. 4, Raymond mill important parts are made of high-quality steel, wear-resistant parts are made of high-performance wear-resistant materials, the whole machine has high wear-resistant performance, reliable operation. 5, the electrical system adopts centralized control, the grinding workshop can basically achieve unmanned operation, and easy maintenance. Technical parameters of Raymond mill
Model number |
3R1510 |
3R2115 |
3R2615 |
3R2715 |
4R2715 |
3R3016 |
4R3216 |
5R4119 |
Feed size (mm) |
5-8 - |
15 |
20 |
20 |
15 to 25 |
15 to 25 |
25 |
30 |
Finished particle size (mm) |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
0.125-0.044 |
Hourly production (tons) |
1-10 |
1-18 |
2-25 |
2-28 |
3-30 |
3-34 |
3-38 |
6-76 |
Center shaft speed |
280 |
180 |
170 |
170 |
170 |
178 |
130 |
105 |
Inside diameter of grinding ring |
405mm |
640mm |
780mm |
830mm |
830mm |
910mm |
970mm |
1280mm |
Roll diameter |
150mm |
210mm |
260mm |
270mm |
270mm |
300mm |
320mm |
410mm |
Height of roller and ring |
100mm |
150mm |
150mm |
150mm |
150mm |
160mm |
160mm |
190mm |
Main motor |
7.5 KW |
15KW |
18.5 KW |
18.5 KW |
22KW |
30KW |
37KW |
75KW |
Fan motor |
5.5 KW |
11KW |
15KW |
18.5 KW |
18.5 KW |
22KW |
30KW |
55KW |
Analyzer motor |
2.2 KW |
2.2 KW |
2.2 KW |
2.2 KW |
2.2 KW |
3KW |
5.5 KW |
7.5 KW |
|