Rolling kneading machine is the use of the principle of physical impact, so that the meat in the roller up and down, impact each other, beat, massage, pickle effect.
Hydraulic roller kneading machine working principle: Hydraulic roller kneading machine adopts variable frequency stepless speed regulation, speed range 3-12 rpm (can choose 1-4 rpm low speed function). Start smoothly, reduce the impact when the machine starts, extend the service life of the equipment. Specially equipped with auxiliary vacuum pipette. With (optional) PLC and touch screen control, the total working time can be divided into up to six process cycles, each process cycle is divided into two steps, each step is independently set time, speed, vacuum state, steering. Meet the processing requirements of diverse products. High standard of hygienic design. The whole machine adopts SUS304 high quality stainless steel material; The inside of the rolling drum is finely polished, there is no sanitary dead Angle, and the discharge position can be thoroughly drained. Optional "V" and "single" blades with different rolling forces to suit different products.
The rolling kneading machine can make the meat evenly absorbed and pickled, and can improve the binding force of the meat and the elasticity of the product; It can improve the taste and section effect of the product; Can enhance water retention, increase the yield; Can improve the internal structure of the product, energy saving and high efficiency. The whole machine is made of stainless steel, compact structure, both ends of the drum are using spinning type cap structure, greater increase the tumble space in the drum, so that the effect of rolling products is uniform, low noise, reliable performance, easy to operate, and higher efficiency.
Kneading machine classification can be divided into; Vacuum roller kneading machine, self-priming vacuum roller kneading machine, automatic vacuum roller kneading machine, side-mouth vacuum roller kneading machine, no vacuum roller kneading machine, frequency conversion vacuum roller kneading machine and other types.
Other similar types of equipment are: vacuum pickling machine, pickling tank, pickling bucket and other equipment.
Variable frequency vacuum roller kneading machine
The variable frequency vacuum roller kneading machine is equipped with a frequency converter to increase the speed regulation function, change the original single fixed revolution, so that the roll kneading revolution can be adjusted arbitrarily according to the process.
Automatic hydraulic vacuum rolling machine (automatic feeding, automatic opening, automatic discharge)
Automatic hydraulic vacuum rolling machine, PLC control, truly realize the automation of the production process
300L rolling machine configuration table
Serial number |
name |
Model number |
material |
quantity |
place of origin |
remark |
one |
Barrel body |
300L |
SUS304 |
one |
The thickness is more than 5mm |
|
2 |
frame |
300L |
SUS304 |
A set |
machining |
|
3 |
Vacuum pump |
40-pump |
one |
Fei Ding |
(Sino-German joint venture) |
|
4 |
Vacuum degree |
0.02-0.078 mpa |
||||
5 |
Barrel parameters |
1200*1000*1000mm |
||||
6 |
head |
Sus304 |
2 |
Jiangsu (Province) |
1000mmx4 spinning molding |
|
7 |
Electric machine |
Copper core |
one |
Shandong Kaiyuan |
1.5 kw |
|
8 |
Chain |
Q235B |
one |
Qingdao Zhenghe |
||
9 |
Puddle gauge |
SUS304 |
3 |
V-shaped mixing rule |
||
10 |
Barrel body roller |
Wear-resistant nylon |
2 |
Shanghai Songya |
||
11 |
Power supply apparatus |
Chint |
A set |
Zhejiang (Province) |
380V/50HZ |
|
twelve |
Rolling speed |
1:71 |
||||
13 |
Overall size of equipment |
1450*1000*1500mm |
||||
fourteen |
Equipment power |
2.25 KW |
||||
15 |
Net weight of equipment |
About 390KG |
||||
16 |
Equipment packaging |
Covered film or wooden case |
500L rolling machine configuration table
Serial number |
name |
Model number |
material |
quantity |
place of origin |
remark |
one |
Barrel body |
500L |
SUS304 |
one |
The thickness is more than 5mm |
|
2 |
frame |
500L |
SUS304 |
A set |
machining |
|
3 |
Vacuum pump |
40-pump |
one |
Fei Ding |
(Sino-German joint venture) |
|
4 |
Vacuum degree |
0.02-0.078 mpa |
||||
5 |
Barrel parameters |
1600*1000*1000mm |
||||
6 |
head |
Sus304 |
2 |
Jiangsu (Province) |
1000mmx4 spinning molding |
|
7 |
Electric machine |
Copper core |
one |
Shandong Kaiyuan |
2.2 kw |
|
8 |
Chain |
Q235B |
one |
Qingdao Zhenghe |
||
9 |
Puddle gauge |
SUS304 |
3 |
V-shaped mixing rule |
||
10 |
Barrel body roller |
Wear-resistant nylon |
2 |
Shanghai Songya |
||
11 |
Power supply apparatus |
Chint |
A set |
Zhejiang (Province) |
380V/50HZ |
|
twelve |
Rolling speed |
1:71 |
||||
13 |
Overall size of equipment |
1900*1000*1550mm |
||||
fourteen |
Equipment power |
2.95 KW |
||||
15 |
Net weight of equipment |
About 490KG |
||||
16 |
Equipment packaging |
Covered film or wooden case |
Vacuum roller kneading machine
Vacuum roller kneading machine is suitable for meat processing, beef and mutton pieces, sauerkraut, pickle pickle pickle evenly mixed materials excellent mixer. Vacuum roller kneading machine is in the vacuum state, the use of physical impact principle, so that the material in the roller up and down, impact each other, beating, so as to achieve massage, pickling effect. The pickling liquid is fully absorbed by the material, enhances the binding force and elasticity of the material, and improves the taste and cross section effect of the product; Can enhance water retention, increase the yield; Can improve the internal structure of the product. The whole machine is made of stainless steel 304, compact structure, both ends of the roller are made of spinning cap structure, greater increase in the tumble space in the roller, so that the effect of rolling products is uniform, low noise, reliable performance, easy to operate, and higher efficiency.
one Make the submerged liquid evenly absorbed in the raw material
2. Enhance the binding force of meat and improve the elasticity of meat
3. Ensure the slicing of meat products and prevent breakage and cracks during slicing
4. Increase water retention, improve the yield
5. Improve product tenderness and structural stability
Vacuum rolling machine function:
1) Set rolling working time
2) Set intermittent rolling time
3) Vacuum rolling time
4) Continuous vacuum rolling time
5) Intermittent vacuum rolling time
GR-1000L vacuum roller kneading machine configuration table
Serial number |
name |
Model number |
material |
quantity |
place of origin |
remark |
|
one |
roller |
1000L |
SUS304 |
one |
Thickness 5mm |
||
2 |
frame |
1000L |
SUS304 |
A set |
machining |
||
3 |
Stirring tooth |
V-shape |
SUS304 |
A set |
Rolling does not hurt the material |
||
4 |
Riding wheel |
nylon |
two |
Shanghai |
Shanghai Songya |
||
5 |
Chain |
Q235B |
A set |
Qingdao |
Qingdao Zhenghe |
||
6 |
bearing |
Q235B |
one |
Hadah |
|||
7 |
head |
SUS304 |
two |
Jiangsu (Province) |
1200X4 pressure molding |
||
8 |
Vacuum pump |
63 pump |
one |
Fei Ding |
Sino-german joint venture |
||
9 |
Drive motor |
3.0 KW |
Copper core |
one |
The New Century |
Shandong Kaiyuan |
|
10 |
Reduction gear |
one |
1:71 |
||||
11 |
Equipment and electrical apparatus |
one |
Zhejiang (Province) |
Zhejiang Chint Electric Appliance |
|||
twelve |
Power source |
380V/50HZ |
|||||
13 |
Gross power |
4.75 KW |
|||||
fourteen |
capacity |
1000LX70%=700kg |
Depends on the actual material |
||||
15 |
weight |
Approx. 1500kg |
|||||
16 |
Overall size |
Length width height =2200X1300X1850 (mm) |
|||||
17 |
Drum size |
Length Width Height =2000X1400X1400 (mm) |