supplyQXS series snow cleaning brush

1, snow rolling brush using low speed high-power vertical power engine to provide power, national IV emission standards, no need to transform the original car or increase the force extractor (pump), to avoid damage to the original car gearbox or engine due to uneven force during operation. The rolling brush is composed of seven main parts: power part, transmission system, main frame part, hydraulic system, heat dissipation device, intelligent electronic control system and suspension.
2, drive brush engine power ≥50 horsepower, national IV emission standard;
3, the total weight of the equipment ≥1400Kg, light weight and strong mobility;
4, overall size: 3480×1970 ×1450 mm;
5. Rolling brush drive mode: The vertical engine is used to provide power, and the rolling brush work is driven by the transmission system to avoid the failure of the motor shaft caused by uneven force on both sides of the motor drive;
6, rolling brush snow width ≥3200mm;
7, rolling brush diameter: ≥760mm;
8, rolling brush speed: 0 ~ 260 RPM, speed can be adjusted at will;
9. The bristles are disc type single or disc type and S-type mixed, the bristles are made of polypropylene and elastic steel wire mixture (mixing ratio 2:1), the bristle density of each plate (sheet) is ≥1500, the length of the bristles is ≥250mm, the whole set of rolling brushes is ≥64 pieces (plate), and the interval of two brushes is ≥50mm (sample provided);
10, rolling torque ≥1700N•m;
11, rolling brush and chassis car connection using fast drive-in connection system, and more than 5 tons of truck connection, installation, disassembly, can be completed in three minutes; 12, rolling cover or main beam and side plate quality is superior to or equivalent to 16Mn steel plate, both sides are protected by formed steel plate;
13, rolling brush brush clearance from the ground can be accurately adjusted;
14, rolling brush support universal tire using rubber solid tire, single tire bearing ≥750Kg, can be manually adjusted up and down, with high-speed anti-shaking, anti-skid tire, explosion-proof tire function;
15, castor piston adopts chrome plating process, anti-wear and anti-corrosion;
16, rolling brush operation speed to implement the national standard GB/T25977-2010 ≥20Km/h;
17, rolling brush suspension adopts safety tie rod double overload protection;
18, the use of vertical hydraulic power unit control brush body action, hydraulic unit motor with insulation sleeve, to avoid melting agent corrosion, resulting in short circuit. The hydraulic power unit is equipped with overheat protection device, when the working temperature is greater than 70℃, automatic power off protection;
19, rolling brush control using integrated digital display controller, can display real-time engine water temperature, oil pressure, voltage, fuel amount, and the use of aviation plug to achieve fast connection, to achieve the right and left up and down action accurate control, the engine self-provided battery, there are power generation, storage, output of the single cycle system and controller electricity, do not consume the original car power;
20, the engine has low temperature start function;
21, vertical hydraulic power system adopts imported solenoid valve, superimposed throttle valve (provide specifications and manufacturers);
22. The roller brush is equipped with a snowboard in front of it, which can improve the visibility of the driver's road conditions; Both sides are equipped with safety shields to ensure efficient and safe operation;
23, equipment engine cover adopts vertical support fixed process, and the inside is inlaid with sound insulation cotton, reduce noise;
24, the engine seat cushion adopts heavy vehicle shock cushion, strong seismic ability;
25, the main color of the rolling brush is engineering yellow, after cleaning and treatment, spray a layer of epoxy anti-rust primer, improve adhesion, spray a layer of epoxy top paint;