The wool of the roller is divided into hard hair and soft hair (different thickness), customized according to customer products, such as: potatoes, sweet potatoes, carrots, such as the surface skin thin general soft hair; Such as taro, chestnuts, peanuts, seafood, lotus root and other surface rough meat thick with hard hair. Roller cleaning machine working principle: driven by the motor through the relative reverse rolling, direct contact with the product to produce friction to achieve the effect of peeling and cleaning; Designed with automatic high pressure spray head to wash while peeling, can achieve product cleaning and peeling effect; And can be changed according to the product variety of the brush stick hair hardness, the selection of hard silk brush roller, can achieve the root fruits and vegetables peeling effect, the selection of soft silk brush roller, can achieve the role of waxing and polishing fruits and vegetables. And it should be noted that when working, it is necessary to start the operation before feeding, which can extend the life of the motor and reduce the probability of motor damage. Roll cleaning machine maintenance must first turn off the power switch, so that the equipment in the shutdown state.
1. Chain adjustment: in the middle of the two sprockets with the finger (middle finger and index finger) pressure chain, the compression amount is 4 ~ 9mm as the standard value, exceeds the standard value, adjust the idler to the specified tightness.
2. Spot check refueling and replacement of the oil of the gearbox without stage change: it is strictly prohibited to remove the oil check plug in the case of fireworks, the oil has just flowed out of the appropriate amount, and it is added when insufficient.
3. Belt adjustment: In the middle of the two belt pulley, the compression of the belt with the finger (middle finger and index finger) is 7 ~ 12mm as the standard value, greater than the standard value, adjust the idler wheel to the specified tightness.
After understanding the maintenance points of the roller cleaning machine, let's take a look at the main points of the roller cleaning machine when it is idle:
1. The rotation part and the friction active part of the roller cleaning machine are fully filled with oil to prevent rust.
2. Each chain is fully oiled to prevent rust.
3. All rotating parts, belts, chains and other tangled debris, vegetable leaves, should be removed.
4. If the components are attached with soil or debris, rinse with water and wipe with a dry cloth to keep the equipment clean
Customer Service 1