Easy installation guide
InstallCd-rom boot interface.
SelectInstallThere are three ways. Generally, Cdrom is selected. ..
InstallThe interface is divided into graphics and text, beginners use graphics, masters generally use text.
InstallThe language is only Chinese and English, Chinens of course.
color=red] Please check the followingInstallPrompt bar on the right of the interface [/color]
InstallInterface;
Partition; If want toInstalldoubleSystemIf so, please select another blank disk or a new disk outInstall.
Select * diskInstallAfter formatting it as: Kylin/386 partition, select this partition to addInstallDot.
Basically there has to be:
1 -InstallThe file type of the primary partition whose dot is'/' is UF2. Not less than 5G,InstallSystemYes.
2 -InstallThe file type is Swap. The dot is' /'. About twice the memory.
3 -- OptionalInstallThe partition whose point is /tem. The file type is UF2. The size is about 100MB.
Then select the largest partition and click Next.
guideSettingsInterface, pay attention to doubleSystemInstallPlease do not place the master boot record on the MBR. Select the option for the first sector.
networkRelated configurations. You can do nothing else, the host name must be.
Login support ROOT login passwordSettings, can be empty
Next, all the way to the next step, until the prompt to change the disk can be.
Related article
-
Desktop Kirin system how to add new fonts? Kirin system comes with fonts are not enough, want to install a new font, how to operate? Let's take a look at the tips for installing and managing fonts on Kirin operating system2023-11-14 -
Teach you how to build a RISC-V cross-compilation environment on the top Kirin
Cross-compilation refers to the platform of compiling code, and the platform of executing the compiled source code are two different platforms, today we are going to talk about the method of compiling RISC-V architecture executable files on the best Kirin (x86/Linux), interested friends together2022-03-22 -
WIN7/8/10+ Kirin dual system introduction
Today Xiaobian brings you WIN7/8/10+ Kirin dual system introduction; I hope it will be helpful to everyone, and friends in need will go to see it2017-03-14 -
Install MySQL5.0 in KYLIN (Kirin System)
2008-09-08 -
Kylin mounting USB flash disk and mobile hard disk at the same time and precautions
The mounting methods vary according to the sequence of inserting the USB flash drive and the mobile hard drive. The following describes the mounting methods: In the first case, you must create a folder usb_1 in the mnt directory before inserting the USB flash drive2008-09-08 -
Kylin Commands for mounting or unmounting a USB flash drive
To mount a usb flash drive, run the following command: Kylin Command to mount a USB flash drive (First, you must create a folder usb_1 in the mnt directory. After the command is executed, you can see the usb_1 drive letter in my computer. msdos refers to the fat file system2008-09-08 -
Kylin hangs commands in the CD-ROM drive
2008-09-08 -
Method of mounting a FDD in Kylin
The floppy disk must be properly formatted, i.e. the F12 file system, and the floppy disk must have the correct boot area, i.e. the 0 track is good2008-09-08
Latest comments