What about Red Flag linux? What should I do after installing Red Flag linux?

This section describes how to configure the network adapter and time, and customize the desktop after Red Flag linux is installed. For a newly installed system, you should first configure the network parameters and time zone

1. Type of software installation package

Install the linux system installation package type. By default, there are three typical configurations (full installation is recommended for beginners)

2, configure the red flag linux partition, after the network configuration (if not configured, you can continue to configure after the installation)

3. Go to the next step to format the file system on the operating system. Loading the CD-ROM installation process

4, the installation process needs to wait for more than 10 minutes

Login type selection

1. After installation, the color depth and resolution are selected according to the parameters supported by the actual display, and the login interface type is selected (server recommended text login)

2. Even if the configuration is over, restart the operating system after the installation is complete.

 

3. Load the operating system driver and partition information, restart the operating system, and enter the installation graphics and system software for the first time

 

4. Red Flag linux boot interface. Note that when the startup, there is an abnormal startup service, if the network adapter starts, this is generally a problem with the network parameter configuration (such as IP conflict or the network adapter is not activated).

Configuration after the first startup

1, for the first startup, if you choose a graphical interface to start. The login window interface is as follows, similar to the windows login window (if it is a text command line, you can start by typing "starting xfs"), the default is Chinese language login

 

2, the first landing needs to load hardware drivers and peripheral devices, you do not have to worry about the linux system for the underlying driver support is very good.

3, drive auto play, login into the operating system will automatically open to play the content of the CD, you can cancel the mounting drive to compete

4, time \ time zone guidance, for the linux system, many process services need to rely on time (if the time is not right, it will affect the operation and start of the process or program), so it is important to first verify the time accurately

 

5, graphical interface configuration network adapter parameters, for red flag linux network adapter configuration, and xp configuration similar to find the "network neighbor" right-click property can be opened, network configuration, pay attention to click "modify parameters"

6, other postscript, for Red Flag linux, has tried to emulate the use of windows habits. Including the My Document icon, My Computer, Start menu, Control panel and more are sure to get beginners started with linux the fastest

Latest comments