What if potplayer plays the card one by one? potplayer plays 4k Catdon solution
Potplayer plays 4k lag, Potplayer plays 8k lag, Potplayer plays 4k drop frame, Potplayer plays 8k drop frame how to do? If you have problems playing 4k or 8k videos in the potplayer software, it is recommended to optimize the software Settings and computer hardware configuration to improve the fluency of video playback, see below for you to solve everything!
Cause analysis
What if potplayer plays the card one by one? There are three reasons for this:
1. Too many boot items, or high-resolution video, the hardware is too old to support the latest decoding, and the soft solution causes the CPU to eat up.
2. The software layer is faulty.
Case 1: Resources are improperly allocated or the hardware configuration is poor
We step by step to solve this problem, the first is that there are too many startup items, generally speaking, few people play multiple videos at the same time, and the other programs opened when the soft solution is closed as far as possible, generally it will not card. If you are playing 4K or 8K or a particularly high bit rate video, closing the redundant program may not be able to solve it. Then it is likely that the hardware can't keep up, but don't worry about changing the equipment, we will optimize it through the Settings.
1. Ways to view video bit rate and resolution.
Right-click Video File Name > Properties > Details
There is resolution and bit rate information, and the larger the value here, the easier it is to card.
2. Eliminate problems with the application software
If the same resolution and bit rate video you see on the web does not card, it is possible that potplayer did not call the hardware decoding. Turning on hardware decoding generally solves this problem.
Usually there is an H/W at the bottom of the video and the figure is marked in gold to open the hardware decoding.
Click the icon "H/W" in gold to turn on hardware decoding
If the card is still stuck after opening, it may be a problem with the setting.
3.potplayer hard decode Settings
The setting path is as follows: in the potplayer window > press F5 to go to Configuration > Filters > Video Decoder > Built-in Decoder /DXVA Settings > Do the following Settings
Check: "Use Hardware Acceleration (DXVA)" and "Use D3D11 DXVA first"
DXVA2 Copy-Back: not used (recommended)
Confirm to save!
Alternatively, right-click on the player -- options as shown
As shown, turn on filters -- video decoder -- built-in decoder /DXVA Settings
As shown, check Use Hardware Acceleration (DXVA) and click OK
Finally click OK, this time to play 4K will not stall, play 4K will not drop frames
This will open potplayer low-burden hard solution video, after closing potplayer click on the video generally will not card, if it is still card, then we continue to look down.
Case 2: The hardware works, but it's not performing at its best
You may not use the CPU hard solution, if you have an independent video card, but the default video playback is not a stronger independent video card, if you use the Potplayer is 64-bit version is support independent video card hard solution, you can set to independent video card mode, so that the graphics processing power of the independent video card to process the video playback task, It can usually solve this problem.
Related article
-
How does PotPlayer set the way to associate video files with PotPlayer
How does PotPlayer set up associated video files? If you want to carry out the video file association operation, then we can find the price association function in the player, and choose the video extension2024-05-06 -
How does PotPlayer Adjust subtitle margins
How does PotPlayer adjust subtitles margins? Some friends want to adjust the subtitles margin, so we need to go to the playback function of the aspect ratio setting page to set the corresponding Settings, the following is about how to use PotPlayer playback2024-05-06 -
Many users may not know how to synchronize subtitles when using PotPlayer software. Let's introduce the operation steps of PotPlayer synchronization subtitles in detail2024-05-06
-
When I use Potplayer, I encounter a problem that subtitles translation cannot work properly. What should I do? Here are some solutions2024-05-05
-
Where is PotPlaye Player SuperEQ equilibrium? PotPlayer enables the SuperEQ balancing method
Do you know how PotPlayer opens SuperEQ balance? The following Xiaobian will give you a detailed introduction to the method of PotPlayer opening SuperEQ balance. Interested partners come and have a look with Xiaobian2024-05-02 -
How does PotPlayer display ICONS in the tray? PotPlayer minimizes the display tray icon method
Recently, some small partners have asked how to display ICONS on the tray PotPlayer? The following brings you the PotPlayer method of displaying ICONS in the tray, and those who need it can come to understand2024-05-02 -
When we use Potplayer to watch videos, if we encounter a video that is too low in frame rate, it looks inconsistent, so how to turn on frame insertion? Let me teach you today2024-05-02
-
In PotPlayer, we can customize the player, so how to enable the taskbar to control the playback? First of all, go to the parameter options page, click the "Use the task stop play control function" option2024-05-02
-
Where is the PotPlayer normalized playback? PotPlayer off only normalizes for video playback
PotPlayer many basic Settings you can not find the location, such as today we introduce only the normalization for video playback function, let's take a look at the detailed graphic tutorial2024-05-02 -
How does potplayer change the color of subtitles
How does potplayer change caption colors? Just go to the setting window of subtitles style and set it accordingly. Below is the specific operation method on how to use PotPlayer to change the subtitles color. Friends who need to come together2024-05-02
Latest comments